IEI Technology NOVA-HM551 User Manual Download Page 60

Page: 60 / 162

NOVA-HM551 5.25" SBC

Page 46

4.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the

NOVA-HM551 may result in permanent damage to the NOVA-HM551

and severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the NOVA-HM551. Dry climates are especially susceptible to ESD. It is therefore

critical that whenever the NOVA-HM551 or any other electrical component is handled, the

following anti-static precautions are strictly adhered to.

Wear an anti-static wristband

: Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.

Self-grounding

: Before handling the board, touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.

Use an anti-static pad

: When configuring the NOVA-HM551, place it on an

antic-static pad. This reduces the possibility of ESD damaging the

NOVA-HM551.

Only handle the edges of the PCB

: When handling the PCB, hold the PCB

by the edges.

Summary of Contents for NOVA-HM551



































































































































































Search results

Summary of Contents for NOVA-HM551

Reviews:

Related manuals for NOVA-HM551

Brands by name

Popular brands

IEI Technology NOVA-HM551, User Manual

Search results

Summary of Contents for NOVA-HM551

Reviews:

Related manuals for NOVA-HM551

Brands by name

Popular brands