IEI Technology NOVA-HM551 User Manual Download Page 63

Page: 63 / 162

NOVA-HM551 5.25" SBC

Page 49

4.4.1 Socket G1 CPU Installation

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

is installed properly and ensure the correct cooling kit is properly

installed.

To install a socket G1 CPU onto the NOVA-HM551, follow the steps below:

WARNING:

When handling the CPU, only hold it on the sides. DO NOT touch the

pins at the bottom of the CPU.

Step 1:

Unlock the CPU retention screw.

When shipped, the retention screw of the

CPU socket should be in the unlocked position. If it is not in the unlocked

position, use a screwdriver to unlock the screw. See

Figure 4-1

Summary of Contents for NOVA-HM551



































































































































































Search results

Summary of Contents for NOVA-HM551

Reviews:

Related manuals for NOVA-HM551

Brands by name

Popular brands

IEI Technology NOVA-HM551, User Manual

Search results

Summary of Contents for NOVA-HM551

Reviews:

Related manuals for NOVA-HM551

Brands by name

Popular brands