manualshive.com logo in svg

IEI Technology NOVA-HM551, User Manual

Share
Download
IEI Technology NOVA-HM551 User Manual Download Page 79

 

 

NOVA-HM551 5.25" SBC 

Page 65

 

Figure 4-15: PCIe Mini Card Installation   

Step 1: 

Insert into the socket at and angle

. Line up the notch on the card with the 

notch on the connector. Slide the PCIe Mini card into the socket at an angle of 

about 20º.   

Step 2: 

Push down until the card clips into place

. Push the other end of the card 

down until it clips into place on the plastic connector.

Step 0:

 

4.7.4 SATA Drive Connection 

The NOVA-HM551 is shipped with two SATA drive cables. To connect the SATA drives to 

the connectors, please follow the steps below. 

Step 1: 

Locate the connectors

. The locations of the SATA drive connectors are shown 

in 

Chapter 3

. 

Step 2: 

Insert the cable connector

. Press the clip on the connector at the end of the 

SATA cable and insert the cable connector into the on-board SATA drive 

connector. See Figure 4-16.

 

 

Step 3: 

Connect the SATA power cable

. Connect the SATA power connector into the 

on-board SATA power connector. See Figure 4-16. 

Summary of Contents for NOVA-HM551



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands