IEI Technology KINO-QM770 User Manual Download Page 174

Page: 174 / 208

KINO-QM770 Mini-ITX SBC

Page 158

Step 1:

Follow the steps described in

Section B.2.1 ~ Section B.2.3

to setup BIOS,

create partitions and install operating system.

Step 2:

Install the auto recovery utility into the system by double clicking the

Utility/AUTORECOVERY-SETUP.exe

in the One Key Recovery CD. This utility

MUST be installed in the system, otherwise, the system will automatically

restore from the factory default image every ten (10) minutes.

Figure B-22: Auto Recovery Utility

Step 3:

Disable the automatically restart function before creating the factory

default image

. Go to: My Computer

Properties

Advanced. Click the

Settings button of Startup and Recovery. Deselect “Automatically restart”. Click

OK to save the settings and exit. (See Figure B-23)

Figure B-23: Disable Automatically Restart

Summary of Contents for KINO-QM770

















































































































































































































Search results

Summary of Contents for KINO-QM770

Reviews:

IEI Technology KINO-QM770, User Manual, Page: 174 / 208

Search results

Summary of Contents for KINO-QM770

Reviews: