IEI Technology KINO-QM770 User Manual Download Page 147

Page: 147 / 208

KINO-QM770 Mini-ITX SBC

Page 131

6.8 USB 3.0 Driver Installation

WARNING:

Do not run this driver’s installer (Setup.exe) from a USB storage device

(ie. external USB hard drive or USB thumb drive). For proper

installation, please copy driver files to a local hard drive folder and run

from there.

To install the touch panel software driver, please follow the steps below.

Step 1:

Access the driver list. (See

Section 6.2

)

Step 2:

Click “

USB 3.0

”.

Step 3:

Locate the setup file and double click on it.

Step 4:

The

Welcome Screen

Figure 6-27

appears.

Step 5:

Click

Next

to continue.

Figure 6-27: USB 3.0 Driver Welcome Screen

Step 6:

The license agreement in

Figure 6-28

appears.

Summary of Contents for KINO-QM770

















































































































































































































Search results

Summary of Contents for KINO-QM770

Reviews:

Brands by name

Popular brands

IEI Technology KINO-QM770, User Manual

Search results

Summary of Contents for KINO-QM770

Reviews:

Brands by name

Popular brands