IEI Technology KINO-DQM871 User Manual Download Page 135

Page: 135 / 211

KINO-DQM871 Mini-ITX SBC

Page 120

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Chipset

Graphics

LAN

USB

3.0

Audio

Intel®

AMT

Installation instructions are given below.

6.2 Starting the Driver Program

To access the driver installation programs, please do the following.

Step 1:

Insert the CD that came with the system into a CD drive connected to the

system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->Computer->CD Drive->autorun.exe"

Step 2:

The driver main menu appears (

Figure 6-1

Summary of Contents for KINO-DQM871




















































































































































































































Search results

Summary of Contents for KINO-DQM871

Reviews:

Related manuals for KINO-DQM871

Brands by name

Popular brands

IEI Technology KINO-DQM871, User Manual

Search results

Summary of Contents for KINO-DQM871

Reviews:

Related manuals for KINO-DQM871

Brands by name

Popular brands