IEI Technology KINO-DQM871 User Manual Download Page 99

Page: 99 / 211

KINO-DQM871 Mini-ITX SBC

Page 84

Wake system with Fixed Time [Disabled]

Use the

Wake system with Fixed Time

option to enable or disable the system wake on

alarm event.

Disabled D

EFAULT

The real time clock (RTC) cannot generate a wake

event

Enabled

If selected, the

Wake up every day

option appears

allowing you to enable to disable the system to wake

every day at the specified time. Besides, the

following options appear with values that can be

selected:

Wake up every day

Wake

date

Wake

hour

Wake up minute

Wake

second

After setting the alarm, the computer turns itself on

from a suspend state when the alarm goes off.

5.3.3 Trusted Computing

Use the

Trusted Computing

menu (

BIOS Menu 5

) to configure settings related to the

Trusted Computing Group (TCG) Trusted Platform Module (TPM).

Summary of Contents for KINO-DQM871




















































































































































































































Search results

Summary of Contents for KINO-DQM871

Reviews:

Related manuals for KINO-DQM871

Brands by name

Popular brands

IEI Technology KINO-DQM871, User Manual

Search results

Summary of Contents for KINO-DQM871

Reviews:

Related manuals for KINO-DQM871

Brands by name

Popular brands