IEI Technology KINO-DBT Series User Manual Download Page 98

Page: 98 / 133

KINO-DBT Mini-ITX SBC

Page 86

Intel Virtualization Technology [Disabled]

Use the

Intel Virtualization Technology

option to enable or disable virtualization on the

system. When combined with third party software, Intel® Virtualization technology allows

several OSs to run on the same system at the same time.

Disabled D

EFAULT

Disables Intel Virtualization Technology.

Enabled

Enables Intel Virtualization Technology.

EIST [Enabled]

Use the

EIST

option to enable or disable Enhanced Intel SpeedStep® Techonology

(EIST).

Disabled

Disables Enhanced Intel SpeedStep®

Techonology.

Enabled D

EFAULT

Enables Enhanced Intel SpeedStep®

Techonology.

Summary of Contents for KINO-DBT Series






































































































































Search results

Summary of Contents for KINO-DBT Series

Reviews:

Related manuals for KINO-DBT Series

Brands by name

Popular brands

IEI Technology KINO-DBT Series, User Manual

Search results

Summary of Contents for KINO-DBT Series

Reviews:

Related manuals for KINO-DBT Series

Brands by name

Popular brands