IEI Technology KINO-DBT Series User Manual Download Page 111

Page: 111 / 133

KINO-DBT Mini-ITX SBC

Page 99

Quiet Boot [Enabled]

Use the

Quiet Boot

BIOS option to select the screen display when the system boots.

Disabled

Normal POST messages displayed

Enabled D

EFAULT

OEM Logo displayed instead of POST messages

Option ROM Messages [Force BIOS]

Use the

Option ROM Messages

option to set the Option ROM display mode.

Force

BIOS

EFAULT

Sets display mode to force BIOS.

Keep

Current

Sets display mode to current.

UEFI Boot [Disabled]

Use the

UEFI Boot

option to enable or disable to boot from a UEFI device.

Enabled

Enable to boot from a UEFI device.

Disabled D

EFAULT

Disable to boot from a UEFI device.

Launch PXE OpROM [Disabled]

Use the

Launch PXE OpROM

option to enable or disable boot option for legacy network

devices.

Disabled D

EFAULT

Ignore all PXE Option ROMs

Enabled

Load PXE Option ROMs

Summary of Contents for KINO-DBT Series






































































































































Search results

Summary of Contents for KINO-DBT Series

Reviews:

IEI Technology KINO-DBT Series, User Manual, Page: 111 / 133

Search results

Summary of Contents for KINO-DBT Series

Reviews: