IEI Technology KINO-DBT Series User Manual Download Page 115

Page: 115 / 133

KINO-DBT Mini-ITX SBC

Page 103

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

All the drivers for the KINO-DBT series are on the utility CD that came with the system.

The utility CD contains drivers for Windows 7 and Windows 8 operating systems. Please

select the corresponding drivers for the system.

The following drivers can be installed on the

Windows 7

operating system:

Chipset

Graphics (Intel® EMGD)

I/O

driver

TXE

USB

3.0

LAN

(Realtek)

Audio

The following drivers can be installed on the

Windows 8

operating system:

Chipset

Graphics

I/O

driver

TXE

LAN

(Realtek)

Audio

6.2 Software Installation

All the drivers for the KINO-DBT are on the CD that came with the system. To install the

drivers, please follow the steps below.

Summary of Contents for KINO-DBT Series






































































































































Search results

Summary of Contents for KINO-DBT Series

Reviews:

Brands by name

Popular brands

IEI Technology KINO-DBT Series, User Manual

Search results

Summary of Contents for KINO-DBT Series

Reviews:

Brands by name

Popular brands