manualshive.com logo in svg

IEI Technology KINO-DBT Series, User Manual, Page: 24 / 133

Share
Download
IEI Technology KINO-DBT Series User Manual Download Page 24

 

 

KINO-DBT Mini-ITX SBC

Page 12 

2.1 Anti-static Precautions 

 WARNING! 

Static electricity can destroy certain electronics. Make sure to follow the 

ESD precautions to prevent damage to the product, and injury to the 

user. 

Make sure to adhere to the following guidelines: 

ƒ

 

Wear an anti-static wristband

: Wearing an anti-static wristband can prevent 

electrostatic discharge. 

ƒ

 

Self-grounding

: Touch a grounded conductor every few minutes to discharge 

any excess static buildup. 

ƒ

 

Use an anti-static pad

: When configuring any circuit board, place it on an 

anti-static mat. 

ƒ

 

Only handle the edges of the PCB

: Don't touch the surface of the 

motherboard. Hold the motherboard by the edges when handling. 

2.2 Unpacking Precautions 

When the KINO-DBT series is unpacked, please do the following: 

ƒ

 

Follow the antistatic guidelines above. 

ƒ

 

Make sure the packing box is facing upwards when opening. 

ƒ

 

Make sure all the packing list items are present. 

Summary of Contents for KINO-DBT Series






































































































































Reviews:

No comments