IEI Technology KINO-DBT Series User Manual Download Page 57

Page: 57 / 133

KINO-DBT Mini-ITX SBC

Page 45

3.3 External Peripheral Interface Connector Panel

The figure below shows the external peripheral interface connector (EPIC) panel. The

EPIC panel consists of the following:

Figure 3-29: External Peripheral Interface Connector

3.3.1 Audio Connector

CN Label:

CN13

CN Type:

Audio jacks

CN Location:

See

Figure 3-29

The audio jacks connect to external audio devices.

Line In port (Light Blue):

Connects a CD-ROM, DVD player, or other audio

devices.

Line Out port (Lime):

Connects to a headphone or a speaker. With

multi-channel configurations, this port can also connect to front speakers.

Microphone (Pink):

Connects a microphone.

Summary of Contents for KINO-DBT Series






































































































































Search results

Summary of Contents for KINO-DBT Series

Reviews:

Related manuals for KINO-DBT Series

Brands by name

Popular brands

IEI Technology KINO-DBT Series, User Manual

Search results

Summary of Contents for KINO-DBT Series

Reviews:

Related manuals for KINO-DBT Series

Brands by name

Popular brands