IEI Technology KINO-9152G4 User Manual Download Page 6

Page: 6 / 232

KINO-9152G4 Mini-ITX Motherboard

Page vi

Packing List

NOTE:

If any of the components listed in the checklist below are missing,

please do not proceed with the installation. Contact the IEI reseller or

vendor you purchased the KINO-9152G4 from or contact an IEI sales

representative directly. To contact an IEI sales representative, please

send an email to [email protected].

The items listed below should all be included in the KINO-9152G4 package.

1 x KINO-9152G4 Mini-ITX Motherboard

1 x Audio Cable

1 x I/O Shielding

1 x IDE Cable

1 x Mini Jumper Pack

2 x SATA Cable

1 x SATA Power Cable

1 x Utility CD

1 x QIG (Quick Installation Guide)

Images of the above items are shown in

Chapter 3

Summary of Contents for KINO-9152G4









































































































































































































































Search results

Summary of Contents for KINO-9152G4

Reviews:

IEI Technology KINO-9152G4, User Manual, Page: 6 / 232

Search results

Summary of Contents for KINO-9152G4

Reviews: