IEI Technology KINO-9152G4 User Manual Download Page 226

Page: 226 / 232

KINO-9152G4 Mini-ITX Motherboard

Page 206

Channel mode for 5.1 speaker output

Synchronize the phone jack switch with speakers settings

Speaker Test

- Each speaker connected to the system is tested individually

to see if the 4-channel or 6-channel audio operates properly.

S/PDIF-In & S/PDIF-Out

- S/PDIF is used to transmit digital and analog audio

signals with either a 48 or 44.1kHz sample rate.

HRTF Demo

- Adjust HRTF (Head Related Transfer Functions) 3D positional

audio before running 3D applications.

Microphone Effect

- Microphone noise suppression is enabled in this menu.

General

- General information about the installed AC’97 audio configuration

utility is listed here.

Summary of Contents for KINO-9152G4









































































































































































































































Search results

Summary of Contents for KINO-9152G4

Reviews:

IEI Technology KINO-9152G4, User Manual, Page: 226 / 232

Search results

Summary of Contents for KINO-9152G4

Reviews: