IEI Technology KINO-9152G4, User Manual, Page: 55 / 232

KINO-9152G4 Mini-ITX Motherboard
Page 35
3.1 Anti-static Precautions
WARNING!
Failure to take ESD precautions during the installation of the
KINO-9152G4 may result in permanent damage to the KINO-9152G4
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the KINO-9152G4. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the KINO-9152G4, or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
Wear an anti-static wristband : - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding :- Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad : When configuring the KINO-9152G4, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
KINO-9152G4.
Only handle the edges of the PCB :- When handling the PCB, hold the PCB by
the edges.
3.2 Unpacking
3.2.1 Unpacking Precautions
When the KINO-9152G4 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 3.1.
Make sure the packing box is facing upwards so the KINO-9152G4 does not
fall out of the box.
Make sure all the components shown in Section 3.3 are present.