IEI Technology KINO-9152G4 User Manual Download Page 49

Page: 49 / 232

KINO-9152G4 Mini-ITX Motherboard

Page 29

Figure 2-19: iTE IT8712F Super I/O

Some of the features of the iTE IT8712F chipset are listed below:

PC98/99/2001, ACPI and LANDesk Compliant

Enhanced Hardware Monitor

Fan Speed Controller

Consumer Remote Control (TV remote) IR with power-up feature

5 V Power Supply

Two 16C550 UARTs for serial port control

One IEEE 1284 Parallel Port

One General I/O port

Keyboard Controller

Watchdog Timer

Serial IRQ Support

Vbat & Vcch Support

5 V Power Supply

2.7.3.1 Super I/O LPC Interface

The LPC interface on the Super I/O complies with the Intel® Low Pin Count Specification

Rev. 1.0. The LPC interface supports both LDRQ# and SERIRQ protocols as well as PCI

PME# interfaces.

2.7.3.2 Super I/O 16C550 UARTs

The onboard Super I/O has two integrated 16C550 UARTs that can support the following:

Two standard serial ports (COM1 and COM2)

IrDa 1.0 and ASKIR (IR1)

Summary of Contents for KINO-9152G4









































































































































































































































Search results

Summary of Contents for KINO-9152G4

Reviews:

IEI Technology KINO-9152G4, User Manual, Page: 49 / 232

Search results

Summary of Contents for KINO-9152G4

Reviews: