manualshive.com logo in svg

IEI Technology KINO-690S1, User Manual, Page: 90 / 229

Share
Download
IEI Technology KINO-690S1 User Manual Download Page 90

 

 

KINO-690S1 Mini-ITX Motherboard

Page 72 

o 

LAN 

o 

VGA screen 

5.3 Unpacking 

5.3.1 Unpacking Precautions 

When the KINO-690S1 is unpacked, please do the following: 

 

Follow the anti-static precautions outlined in 

Section 5.1

. 

 

Make sure the packing box is facing upwards so the KINO-690S1 does not fall 

out of the box. 

 

Make sure all the components in the checklist shown in 

Chapter 3

 are 

present. 

 NOTE: 

If some of the components listed in the checklist in 

Chapter  3

 are 

missing, please do not proceed with the installation. Contact the IEI 

reseller or vendor you purchased the KINO-690S1 from or contact an 

IEI sales representative directly. To contact an IEI sales representative, 

please send an email to [email protected]. 

 

Summary of Contents for KINO-690S1






































































































































































































































Reviews:

No comments