IEI Technology KINO-690S1 User Manual Download Page 155

Page: 155 / 229

KINO-690S1 Mini-ITX Motherboard

Page 137

6.5.4 CD/DVD Drives

Use the

CD/DVD Drives

menu to specify the boot sequence of the available CD/DVD

drives. When the menu is opened, the CD drives and DVD drives connected to the system

are listed as shown below:

1st Drive

[CD/DVD: PM-(part ID)]

NOTE:

Only the drives connected to the system are shown. For example, if only

two CDs or DVDs are connected only “

1st Drive

” and “

2nd Drive

” are

listed.

The boot sequence from the available devices is selected. If the “

1st Drive

” option is

selected a list of available CD/DVD drives is shown. Select the first CD/DVD drive the

system boots from. If the “

1st Drive

” is not used for booting this option may be disabled.

Summary of Contents for KINO-690S1






































































































































































































































Search results

Summary of Contents for KINO-690S1

Reviews:

IEI Technology KINO-690S1, User Manual, Page: 155 / 229

Search results

Summary of Contents for KINO-690S1

Reviews: