IEI Technology KINO-690S1 User Manual Download Page 20

Page: 20 / 229

KINO-690S1 Mini-ITX Motherboard

Page 2

1.1 Overview

The KINO-690S1 Mini-ITX form factor CPU card is an AMD Socket S1 processor platform.

Up to 4GB of DDR2 SO-DIMM SDRAM and up to four SATA II hard disk drives (HDD) are

supported. SATA drives can be installed in a RAID configuration. High-performance PCI

Express (PCIe) Gigabit Ethernet (GbE) connectivity is integrated into the system. Eight

USB 2.0 channels along with a PCI expansion slot enable system flexibility and

expansion. Multi-display interfaces and dual display functions ensure display versatility.

Support for a (optional) trusted platform module (TPM) provides additional system security

during system boot-up.™

1.1.1 KINO-690S1 Features

Some of the KINO-690S1 features are listed below.

Supports the following AMD Socket S1 processors:

AMD Turion™ 64 X2 dual-core mobile

Mobile AMD Sempron™

Supports two 200-pin 400MHz, 533MHz or 667MHz DDR2 SO-DIMMs with a

maximum capacity of 2GB.

Four SATA II drives with transfer rates of 3.0Gb/s supported

Two Ultra ATA 133, Ultra ATA 100, Ultra ATA 66 or Ultra ATA 33 IDE HDDs

supported

Eight USB 2.0 devices supported

Dual PCIe GbE Ethernet connectors

Mini-ITX form factor

RoHS compliant

Supports ATX power supplies

1.2 KINO-690S1 Overview

1.2.1 KINO-690S1 Overview Photo

The KINO-690S1 has a wide variety of peripheral interface connectors.

Figure 1-1

is a

labeled photo of the peripheral interface connectors on the KINO-690S1.

Summary of Contents for KINO-690S1






































































































































































































































Search results

Summary of Contents for KINO-690S1

Reviews:

IEI Technology KINO-690S1, User Manual, Page: 20 / 229

Search results

Summary of Contents for KINO-690S1

Reviews: