IEI Technology IVS-110 Page 51 Manual Download

Page: 51 / 119

IVS-110 Embedded System

Page 37

3.13 Mobile AP

IEI provides an application tool, Mobile AP, for the users of the IVS-110 with the WWAN

module installed to manage mobile network and make a phone call.

3.13.1 Installation

To install this application tool, please locate the

WLAN

folder in the utility CD. This folder

contains two files for different operating systems.



IEI_Mobile_AP_Setup_x86_vxx.exe

for 32-bit Windows OS



IEI_Mobile_AP_Setup_x64_vxx.exe

for 64-bit Windows OS

Double click the .exe file that is corresponding to the OS version, then the system starts to

extract the file. After extracting, it starts to install the Bluetooth driver followed by the

installation of the WWAN module driver, and IEI Mobile AP application tool. It is

recommended to follow the step-by-step procedure to install all of these three

drivers/applications.

NOTE:

After installing the drivers and applications, the IVS-110 must be

restarted in order to complete the installation.

Summary of Contents for IVS-110
























































































































Search results

Summary of Contents for IVS-110

Reviews:

Related manuals for IVS-110

Brands by name

Popular brands

IEI Technology IVS-110, Manual

Search results

Summary of Contents for IVS-110

Reviews:

Related manuals for IVS-110

Brands by name

Popular brands