IEI Technology IVS-110, Manual

Page: 47 / 119

IVS-110 Embedded System
Page 33
[Optional Choice]
The OBD-II cable ( Figure 3-16 ) can be purchased separately. The user can use the cable
to connect the IVS-110 with the vehicle. The pinout locations of OBD-II cable connector
are also shown below.
Figure 3-16: OBD-II Cable and Connector Pinouts
3.11 Power-On Procedure
3.11.1 Installation Checklist
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
To power on the embedded system please make sure of the following:

The bottom cover is installed

All peripheral devices (monitors, serial communications devices etc.) are
connected

The power cables are plugged in

The system is securely mounted