IEI Technology IVS-110, Manual

Page: 31 / 119

IVS-110 Embedded System
Page 17
Step 2: Install WLAN/WWAN module and SIM card (optional)
Step 3: Install mSATA module or SATA SSD
Step 4: Mount the IVS-110
Step 5: Connect the peripheral devices
Step 6: Power the system up Step 0:
3.4 Open the Bottom Cover
WARNING:
1. Never open the system cover while power is still being fed into the system.
Before opening the system, make sure the system has been turned off and all
power connectors unplugged.
2. Over-tightening bottom cover screws will cause damage to the bottom
surface. Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).
Before the internal component can be installed, the bottom cover must be removed to
access the main board. To remove the back cover, please follow the steps below:
Step 1: Turn the IVS-110 over.
Step 2: Remove the bottom panel retention screws to detach the bottom panel from the
chassis ( Figure 3-1 ).