IEI Technology IQ7-DB-MITX, User Manual

Page: 98 / 139

IQ7 Design Guide
Page 86
ƒ
Serial Port4 Address [2E8]
Use the Serial Port4 IRQ option to select the interrupt address for serial port 4.
Î
Disabled
No base address is assigned to serial port 4
Î
3F8
Serial port 4 I/O port address is 3F8
Î
2F8
Serial port 4 I/O port address is 2F8
Î
3E8
Serial port 4 I/O port address is 3E8
Î
2E8 D
EFAULT
Serial port 4 I/O port address is 2E8
ƒ
Parallel Port Address [378]
Use the Parallel Port Address option to select the parallel port base address.
Î
Disabled
No base address is assigned to the Parallel Port
Î
378 D
EFAULT
Parallel Port I/O port address is 378
Î
278
Parallel Port I/O port address is 278
Î
3BC
Parallel Port I/O port address is 3BC
ƒ
Parallel Port Mode [Normal]
Use the Parallel Port Mode option to select the mode the parallel port operates in.
Î
Normal D
EFAULT
The normal parallel port mode is the standard mode
for parallel port operation.
Î
Bi-directional Parallel port outputs are 8-bits long. Inputs are
accomplished by reading 4 of the 8 bits on the
status register.
Î
EPP The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.