IEI Technology IMBA-9454 User Manual Download Page 176

Page: 176 / 228

IMBA-9454 Motherboard

Page 158

7.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Chipset driver

VGA driver

LAN driver

Audio driver

IDE controller

Installation instructions are given below.

7.2 Driver CD Auto-run

All the drivers for the IMBA-9454 are on the CD that came with the system. To install the

drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the system does not initiate the "autorun" program when the CD is

inserted, click the

Start

button, select

Run

, then type

X:\autorun.exe

(where

X:\

is the system CD drive) to access the IEI Driver CD main

menu.

Step 2:

The driver main menu appears (Figure 7-1).

Summary of Contents for IMBA-9454





































































































































































































































Search results

Summary of Contents for IMBA-9454

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-9454, User Manual

Search results

Summary of Contents for IMBA-9454

Reviews:

Brands by name

Popular brands