IEI Technology IMBA-9454 User Manual Download Page 163

Page: 163 / 228

IMBA-9454 Motherboard

Page 145

6.4.4 USB Drives

Use the USB Drives menu (BIOS Menu 21) to specify the boot sequence of the available

USB devices. When the menu is opened, the USB devices connected to the system are

listed as shown below:

1st Drive

[1st USB DRIVE]

2nd Drive

[2nd USB DRIVE]

NOTE:

Only the drives connected to the system are shown. For example, if

only one USB drive is connected only “

1st Drive

” is listed.

The boot sequence from the available devices is selected. If the “

1st Drive

” option is

selected a list of available USB drives is shown. Select the first USB drive the system

boots from. If the “

1st Drive

” is not used for booting this option may be disabled.

BIOS Menu 21: USB Drives

Summary of Contents for IMBA-9454





































































































































































































































Search results

Summary of Contents for IMBA-9454

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-9454, User Manual

Search results

Summary of Contents for IMBA-9454

Reviews:

Brands by name

Popular brands