IEI Technology IMBA-9454 User Manual Download Page 149

Page: 149 / 228

IMBA-9454 Motherboard

Page 131

6.3.7 APM Configuration

The

APM Configuration

menu (

BIOS Menu 11

) allows the advanced power

management options to be configured.

BIOS Menu 11: Advanced Power Management Configuration

Power Management/APM [Enabled]

Use the

Power Management/APM

BIOS option to enable access to the advanced power

management features. If this option is disabled, the only other option on the screen is the

Power Button Mode

Disabled

Disables the Advanced Power Management (APM)

feature

Enabled D

EFAULT

Enables the APM feature

Power Button Mode [On/Off]

Use the

Power Button Mode

BIOS to specify how the power button functions.

On/Off D

EFAULT

When the power button is pressed the system is either

turned on or off

Summary of Contents for IMBA-9454





































































































































































































































Search results

Summary of Contents for IMBA-9454

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-9454, User Manual

Search results

Summary of Contents for IMBA-9454

Reviews:

Brands by name

Popular brands