IEI Technology IMBA-9454 User Manual Download Page 150

Page: 150 / 228

IMBA-9454 Motherboard

Page 132

Suspend

When the power button is pressed the system goes into

suspend mode

Restore on AC Power Loss [Power Off]

Use the

Restore on AC Power Loss

BIOS option to specify what state the system

returns to if there is a sudden loss of power to the system.

Power Off

EFAULT

The system remains turned off.

Power On

The system turns on.

Last State

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

Power Supply Mode [ATX]

Use the

Power Supply Mode

BIOS option to to select the power supply that is connected

to the system.

An AT power supply is connected to the system

ATX D

EFAULT

An ATX power supply is connected to the system

Resume on Ring [Enabled]

Use the

Resume on Ring

BIOS option to enable activity on the RI (ring in) modem line to

rouse the system from a suspend or standby state. That is, the system will be roused by

an incoming call on a modem.

Disabled

Wake event not generated by an incoming call

Enabled D

EFAULT

Wake event generated by an incoming call

Summary of Contents for IMBA-9454





































































































































































































































Search results

Summary of Contents for IMBA-9454

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-9454, User Manual

Search results

Summary of Contents for IMBA-9454

Reviews:

Brands by name

Popular brands