IEI Technology IMB-Q670 User Manual Download Page 96

Page: 96 / 179

IMB-Q670 Micro-ATX Motherboard

Page 82

USB Devices

The

USB Devices Enabled

field lists the USB devices that are enabled on the system

USB Support [Enabled]

Use the

USB Support

option to enable or disable USB support on the system.

Disabled

USB support disabled

Enabled D

EFAULT

USB support enabled

Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support. Normally if this option is not enabled, any attached USB mouse or USB keyboard

does not become available until a USB compatible operating system is fully booted with all

USB drivers loaded. When this option is enabled, any attached USB mouse or USB

keyboard can control the system even when there is no USB driver loaded onto the

system.

Disabled

Legacy USB support disabled

Enabled D

EFAULT

Legacy USB support enabled

Summary of Contents for IMB-Q670




















































































































































































Search results

Summary of Contents for IMB-Q670

Reviews:

Related manuals for IMB-Q670

Brands by name

Popular brands

IEI Technology IMB-Q670, User Manual

Search results

Summary of Contents for IMB-Q670

Reviews:

Related manuals for IMB-Q670

Brands by name

Popular brands