manualshive.com logo in svg

IEI Technology IMB-Q670, User Manual

Share
Download
IEI Technology IMB-Q670 User Manual Download Page 76

 

 

IMB-Q670 Micro-ATX Motherboard

Page 62 

Step 1: 

Identify the audio plugs

. The plugs on your home theater system or speakers 

may not match the colors on the rear panel. 

Step 2: 

Plug the audio plugs into the audio jacks

. Plug the audio plugs into the audio 

jacks. If the plugs on your speakers are different, an adapter will need to be used 

to plug them into the audio jacks. 

 

Figure 4-14: Audio Connector 

Step 3: 

Check audio clarity

. Check that the sound is coming through the right speakers 

by adjusting the balance front to rear and left to right.

 

Step 0:

 

4.5.2 LAN Connection 

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection 

to an external network. To connect a LAN cable with an RJ-45 connector, please follow 

the instructions below. 

Step 1: 

Locate the RJ-45 connectors

. The locations of the USB connectors are shown 

in 

Chapter 4

. 

Step 2: 

Align the connectors. 

Align the RJ-45 connector on the LAN cable with one of 

the RJ-45 connectors on the IMB-Q670. See 

Figure 4-15

. 

Summary of Contents for IMB-Q670




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands