IEI Technology IMB-Q670 User Manual Download Page 94

Page: 94 / 179

IMB-Q670 Micro-ATX Motherboard

Page 80

SATA Mode [AHCI Mode]

Use the

SATA Mode

option to configure SATA devices as normal IDE devices.

Disable

Disables SATA devices.

IDE Mode

Configures SATA devices as normal IDE device.

AHCI Mode

EFAULT

Configures SATA devices as AHCI device.

RAID Mode

Configures SATA devices as RAID device.

Staggered Spin-up [Disabled]

Staggered Spin-up allows the system to power up one drive at a time to prevent excess

power consumption. Use the

Staggered Spin-up

option to enable or disable the

staggered spin-up function.

Disabled D

EFAULT

Disables staggered spin-up.

Enabled

Enables staggered spin-up.

External SATA Port

Use the

External SATA Port

option to enable or disable the external SATA port.

Disabled D

EFAULT

Disables the external SATA port.

Enabled

Enables the external SATA port.

Hot Plug

Use the

Hot Plug

option to enable or disable the hot plug function.

Disabled D

EFAULT

Disables the hot plug function.

Enabled

Enables the hot plug function.

5.3.5 Intel TXT(LT) Configuration

Use the

Intel TXT(LT) Configuration

menu (

BIOS Menu 8

) to configure Intel Trusted

Execution Technology support.

Summary of Contents for IMB-Q670




















































































































































































Search results

Summary of Contents for IMB-Q670

Reviews:

Brands by name

Popular brands

IEI Technology IMB-Q670, User Manual

Search results

Summary of Contents for IMB-Q670

Reviews:

Brands by name

Popular brands