manualshive.com logo in svg

IEI Technology IMB-C2060, User Manual

Share
Download
IEI Technology IMB-C2060 User Manual Download Page 81

 

 

IMB-C2060 microATX Motherboard 

Page 67

 

Figure 4-20: USB Connector 

4.5.7 VGA Monitor Connection 

The IMB-C2060 has a single female DB-15 connector on the external peripheral interface 

panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor 

to the IMB-C2060, please follow the instructions below. 

Step 1: 

Locate the female DB-15 connector

. The location of the female DB-15 

connector is shown in 

Chapter 3

. 

Step 2: 

Align the VGA connector

. Align the male DB-15 connector on the VGA screen 

cable with the female DB-15 connector on the external peripheral interface. 

Step 3: 

Insert the VGA connector

. 

Once the connectors are properly aligned with the 

insert the male connector from the VGA screen into the female connector on the 

IMB-C2060. See 

Figure 4-21

. 

Summary of Contents for IMB-C2060













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands