manualshive.com logo in svg

IEI Technology IMB-C2060, User Manual

Share
Download
IEI Technology IMB-C2060 User Manual Download Page 106

 

 

IMB-C2060 microATX Motherboard

Page 92 

5.3.9.1 Smart Fan Mode Configuration 

Use the 

Smart Fan Mode Configuration 

submenu (

BIOS Menu 14

) to configure smart 

fan temperature and speed settings. 

Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 

Smart Fan Mode Configuration 
 

CPU Smart Fan control 

[Auto Duty-Cycle Mode]

First Boundary Temperature 

60 

Second Boundary Temperature 

50 

Third Boundary Temperature 

40 

Fourth Boundary Temperature 

30 

 
System Smart Fan control 

[Auto Duty-Cycle Mode]

First Boundary Temperature 

60 

Second Boundary Temperature 

50 

Third Boundary Temperature 

40 

Fourth Boundary Temperature 

30 

 

 
Smart Fan Mode Select 
 
 
 
 
 
 
--------------------- 



: Select Screen 

 

: Select Item 

Enter 

Select 

+  -   Change  Opt. 
F1 General 

Help 

F2 Previous 

Values 

F3 Optimized 

Defaults

F4 

Save & Exit 

ESC Exit 

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc. 

BIOS Menu 14: Smart Fane Mode Configuration

 

 

CPU Smart Fan control [Auto Duty-Cycle Mode] 

Use the

 

CPU Smart Fan control

 option to configure the CPU Smart Fan. 

 

Manual Duty-Cycle 

Mode 

 

The fan spins at the speed set in Manual by Duty 

Cycle settings 

 

Auto Duty-Cycle 

Mode 

D

EFAULT

 

The fan adjusts its speed using Auto by 

Duty-Cycle settings 

 

System Smart Fan control [Auto Duty-Cycle Mode] 

Use the

 

System Smart Fan control

 option to configure the System Smart Fan. 

 

Manual Duty-Cycle 

Mode 

 

The fan spins at the speed set in Manual by Duty 

Cycle settings 

Summary of Contents for IMB-C2060













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands