IEI Technology IMB-C2060 User Manual Download Page 66

Page: 66 / 172

IMB-C2060 microATX Motherboard

Page 52

4.2.2 Socket LGA1155 Cooling Kit Installation

WARNING:

DO NOT attempt to install a push-pin cooling fan.

The pre-installed support bracket prevents the board from

bending and is ONLY compatible with captive screw type cooling

fans.

Figure 4-5: Cooling Kits (CF-1156A-RS and CF-1156E-RS)

The cooling kit can be bought from IEI. The cooling kit has a heatsink and fan.

WARNING:

Do not wipe off (accidentally or otherwise) the pre-sprayed layer of

thermal paste on the bottom of the heat sink. The thermal paste

between the CPU and the heat sink is important for optimum heat

dissipation.

To install the cooling kit, follow the instructions below.

Step 1:

A cooling kit bracket is pre-installed on solder side of the mainboard. See

Figure

4-6.

Summary of Contents for IMB-C2060













































































































































































Search results

Summary of Contents for IMB-C2060

Reviews:

Brands by name

Popular brands

IEI Technology IMB-C2060, User Manual

Search results

Summary of Contents for IMB-C2060

Reviews:

Brands by name

Popular brands