IEI Technology IMB-C2060 User Manual Download Page 75

Page: 75 / 172

IMB-C2060 microATX Motherboard

Page 61

Figure 4-14: SATA Power Drive Connection

The SATA power cable can be bought from IEI. See Optional Items in Section 2.4.

4.5 External Peripheral Interface Connection

This section describes connecting devices to the external connectors on the IMB-C2060.

4.5.1 Audio Connector

The audio jacks on the external audio connector enable the IMB-C2060 to be connected

to a stereo sound setup. Each jack supports both input and output. When connecting a

device, the High Definition Audio utility will automatically detect input or output. The lime

green (top) audio jack does not support input from a microphone. To install the audio

devices, follow the steps below.

Step 1:

Identify the audio plugs

. The plugs on your home theater system or speakers

may not match the colors on the rear panel.

Summary of Contents for IMB-C2060













































































































































































Search results

Summary of Contents for IMB-C2060

Reviews:

Brands by name

Popular brands

IEI Technology IMB-C2060, User Manual

Search results

Summary of Contents for IMB-C2060

Reviews:

Brands by name

Popular brands