manualshive.com logo in svg

IEI Technology IMB-C2060, User Manual

Share
Download
IEI Technology IMB-C2060 User Manual Download Page 100

 

 

IMB-C2060 microATX Motherboard

Page 86 

5.3.8 F81866 Super IO Configuration 

Use the 

F81866 Super IO Configuration

 menu (

BIOS Menu 11

) to displays IO chip type 

and the submenus for configuring the external serial port 1 ~ 6. 

Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 

Super IO Configuration 
 
Super IO Chip 

F81866 

> Serial Port 1 Configuration 
> Serial Port 2 Configuration 
> Serial Port 3 Configuration 
> Serial Port 4 Configuration 
> Serial Port 5 Configuration 
> Serial Port 6 Configuration 
 
 

 
Set Parameters of Serial 
Port 1 (COMA) 
 
 
--------------------- 



: Select Screen 

 

: Select Item 

Enter 

Select 

+  -   Change  Opt. 
F1 General 

Help 

F2 Previous 

Values 

F3 Optimized 

Defaults

F4 

Save & Exit 

ESC Exit 

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc. 

BIOS Menu 11: F81866 Super IO Configuration 

5.3.8.1 Serial Port n Configuration 

Use the 

Serial Port n Configuration

 menu (

BIOS Menu 12

) to configure the serial port n. 

Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 

Serial Port n Configuration 
 

Serial Port 

[Enabled] 

Device Settings 

Reset Required 

 
Change Settings 

[Auto]  

 

 
Enable or Disable Serial 
Port (COM) 
 
 
--------------------- 



: Select Screen 

 

: Select Item 

Enter 

Select 

=  -   Change  Opt. 
F1 General 

Help 

F2 Previous 

Values 

F3 Optimized 

Defaults

F4 

Save & Exit 

ESC Exit 

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc. 

BIOS Menu 12: Serial Port n Configuration Menu 

Summary of Contents for IMB-C2060













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands