IEI Technology IEM-945GSE User Manual Download Page 103

Page: 103 / 148

IEM-945GSE ETX 3.0 Module

Page 91

7.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Chipset driver installation

VGA driver installation

LAN driver installation

Audio driver installation

iSMM

installation

Installation instructions are given below.

7.2 Starting the Driver Program

To access the driver installation programs, please do the following.

Step 1:

Insert the CD-ROM that came with the system into a CD-ROM drive attached to

the system.

Summary of Contents for IEM-945GSE





















































































































































Search results

Summary of Contents for IEM-945GSE

Reviews:

Related manuals for IEM-945GSE

Brands by name

Popular brands

IEI Technology IEM-945GSE, User Manual

Search results

Summary of Contents for IEM-945GSE

Reviews:

Related manuals for IEM-945GSE

Brands by name

Popular brands