IEI Technology IEM-945GSE User Manual Download Page 121

Page: 121 / 148

IEM-945GSE ETX 3.0 Module

Page 109

Step 8:

Select “

Yes, I wish to restart my computer now

” And click

INISH

to exit the

InstallShield Wizard and restart the computer.

Step 0:

7.7 iSMM Installation

The iSMM (Intelligent System Management Module) allows hardware functions to be

monitored from within the operating system. The iSMM can be set to sound an alarm

when voltages, temperatures or fan speeds rise above or fall below the set limits.

Step 1:

Access the driver list shown in

Figure 7-3

. (See

Section 7.2

)

Step 2:

Click “

6-iSMM

”

Step 3:

The iSMM directory appears. (

Figure 7-29

)

Figure 7-29: iSMM Directory

Step 4:

Double click the

iSMM EN V1.11.00

directory icon. (

Figure 7-29

)

Summary of Contents for IEM-945GSE





















































































































































Search results

Summary of Contents for IEM-945GSE

Reviews:

Related manuals for IEM-945GSE

Brands by name

Popular brands

IEI Technology IEM-945GSE, User Manual

Search results

Summary of Contents for IEM-945GSE

Reviews:

Related manuals for IEM-945GSE

Brands by name

Popular brands