IEI Technology IEM-945GSE User Manual Download Page 95

Page: 95 / 148

IEM-945GSE ETX 3.0 Module

Page 83

Internal Graphics Mode Select [Enable, 8 MB]

The

Internal Graphic Mode Select

option determines the amount of system memory that

can be used by the Internal graphics device.

Disable

Enable, 1 MB

1 MB of memory used by internal graphics device

Enable, 8 MB

EFAULT

8 MB of memory used by internal graphics device

Boot Graphic Adapter Priority [PCI/IGD]

The

Boot Graphic Adapter Priority

setting determines the priority of the attached

graphics devices.

IGD

Only the internal graphics devices are checked, these

include VGA, LVDS, TV and SDVO.

PCI/IGD D

EFAULT

Graphics cards connected to the PCI expansion card

slots on the backplane are checked first for graphics

cards. Next, the internal devices, mentioned above, are

checked.

Summary of Contents for IEM-945GSE





















































































































































Search results

Summary of Contents for IEM-945GSE

Reviews:

Related manuals for IEM-945GSE

Brands by name

Popular brands

IEI Technology IEM-945GSE, User Manual

Search results

Summary of Contents for IEM-945GSE

Reviews:

Related manuals for IEM-945GSE

Brands by name

Popular brands