IEI Technology IBX-700 Series, User Manual

Page: 96 / 218

IBX-700 Integrated Service Computer
Page 78
Boots Graphics Adapter Priority [PEG/PCI]
Use the
Boots Graphics Adapter Priority
option to select the graphics controller used as
the primary boot device. Select either an integrated graphics controller (IGD) or a
combination of PCI graphics controller, a PCI express (PEG) controller or an IGD.
Configuration options are listed below:
IGD
PEG/IGD
D
EFAULT
Internal Graphics Mode Select [Enable, 8MB]
Use the
Internal Graphic Mode Select
option to specify the amount of system memory
that can be used by the Internal graphics device.
Disable
Enable, 1MB
1MB of memory used by internal graphics device
Enable, 8MB D
EFAULT
8MB of memory used by internal graphics device
Aperture Size Select [256MB]
Use the
Aperture Size Select
option to select the size of the AGP aperture and the size of
the GART (Graphics Address Relocation Table). The aperture is a portion on the PCI
memory address range dedicated for use as AGP memory address space and the GART
is a translation table that translates the AGP memory addresses into actual addresses.
The following options are available.
256MB
D
EFAULT
128MB
5.7.2 Southbridge Configuration
The
Southbridge Configuration
menu (
BIOS Menu 17
) the Southbridge chipset to be
configured.