IEI Technology IBX-700 Series User Manual Download Page 159

Page: 159 / 218

IBX-700 Integrated Service Computer

Page 141

A.1.2 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the IBX-700

Series may result in permanent damage to the IBX-700 Series and

severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the IBX-700 Series. Dry climates are especially susceptible to ESD. It is

therefore critical that whenever the IBX-700 Series is opened and any of the electrical

components are handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband

: Wearing a simple anti-static wristband can

help to prevent ESD from damaging any electrical component.

Self-grounding

: Before handling any electrical component, touch any

grounded conducting material. During the time the electrical component is

handled, frequently touch any conducting materials that are connected to the

ground.

Use an anti-static pad

: When configuring or working with an electrical

component, place it on an antic-static pad. This reduces the possibility of ESD

damage.

Only handle the edges of the electrical component

: When handling the

electrical component, hold the electrical component by its edges.

A.2 Maintenance and Cleaning Precautions

When maintaining or cleaning the IBX-700 Series, please follow the guidelines below.

A.2.1 Maintenance and Cleaning

Prior to cleaning any part or component of the IBX-700 Series, please read the details

below.

Except for the LCD panel, never spray or squirt liquids directly onto any other

Summary of Contents for IBX-700 Series



























































































































































































































Search results

Summary of Contents for IBX-700 Series

Reviews:

Related manuals for IBX-700 Series

Brands by name

Popular brands

IEI Technology IBX-700 Series, User Manual

Search results

Summary of Contents for IBX-700 Series

Reviews:

Related manuals for IBX-700 Series

Brands by name

Popular brands