manualshive.com logo in svg

IEI Technology ECK-3699GH, User Manual, Page: 90 / 181

Share
Download
IEI Technology ECK-3699GH User Manual Download Page 90

 

ECK-3699GH Embedded System

 

ACPI Aware O/S [Yes] 

Use the 

ACPI Aware O/S

 option to enable the system to configure ACPI power saving 

options. ACPI can only be implemented if the system OS complies with the ACPI standard. 

Windows 98, Windows 2000, and Windows XP all comply with ACPI.   

 

No 

 

Disables the ACPI support for the OS. This selection should 

be disabled if the OS does not support ACPI 

 

Yes D

EFAULT

 

Enables the ACPI support for the operating system. This 

selection should be enabled if the OS does support ACPI 

5.3.6.1 Advanced ACPI Configuration 

Use the 

Advanced ACPI Configuration

 menu (Error! Reference source not found.) to 

select the ACPI state when the system is suspended. 

BIOS Menu 10: Advanced ACPI Configuration

 

 

 

Page 90 

 

IEI® Technology, Corp

.

 

Summary of Contents for ECK-3699GH






















































































































































































Reviews:

No comments