manualshive.com logo in svg

IEI Technology ECK-3699GH, User Manual, Page: 22 / 181

Share
Download
IEI Technology ECK-3699GH User Manual Download Page 22

 

ECK-3699GH Embedded System

2.1 ECK-3699GH Mechanical Overview 

The ECK-3699GH is made of a metal chassis. The chassis is covered with a top cover 

and comprises multiple air vents to allow for the free flow of cooling air through the system. 

The front panel of the chassis covered with acrylic front bezel contains buttons, indicator 

and USB ports. The rear panel of the chassis connects to all the external interface 

connectors on a preinstalled IEI KINO series motherboard. The motherboard is directly 

connected to the DC-to-DC power module converter. Two cooling fans are preinstalled in 

the side of the chassis. 

2.2 Physical Dimensions 

The physical dimensions of the ECK-3699GH embedded systems are listed below. 

2.2.1 ECK-3699GH Dimensions 

The dimensions of the ECK-3699GH are listed below and shown in 

Figure 2-1

. 

 

Height

: 65.00mm 

 

Width:

 258.20mm 

 

Length

: 210.00mm 

 

Figure 2-1: ECK-3699GH Dimensions (mm) 

 

Page 22 

 

IEI® Technology, Corp

.

 

Summary of Contents for ECK-3699GH






















































































































































































Reviews:

No comments