IEI Technology ECK-3699GH, User Manual, Page: 68 / 181

ECK-3699GH Embedded System
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
To power on the embedded system please make sure of the following:
The memory module is installed
The fans are properly connected
The top cover is properly installed
All peripheral devices (VGA monitor, serial communications devices etc.) are
connected
The power cables are plugged in
4.4.2 Power-on Procedure
To power-on the ECK-3699GH please follow the steps below:
Step 1: Push the power button.
Step 2: Once turned on, the green power LED should be turned on. See Figure 4-12 .
Step 0: (
Figure 4-12: Power Button and Power LED
Page 68
IEI® Technology, Corp .