IEI Technology DRPC-242-ADL-P Series, User Manual, Page: 39 / 167

DRPC-242-ADL-P
Page 23
Figure 3-8: Securing the WLAN Module
Step 5:
Connect the two RF cables to the antenna connectors on the WLAN module
( Figure 3-9 ).
Figure 3-9: Connecting RF Cables
Step 6:
Remove the nut and washer from the SMA connector at the other end of the RF
cable.
Step 7:
Knock out the reserved antenna holes on the chassis. Insert the SMA connector
to the antenna connector holes on the rear panel.
Step 8:
Secure the SMA connector by inserting the washer and tightening it with nut.
Step 9:
Install the external antenna ( Figure 3-10) .