IEI Technology DRPC-242-ADL-P Series, User Manual

Page: 33 / 167

DRPC-242-ADL-P
Page 17
3.1 Installation Precautions
CAUTION:
The DRPC-242-ADL-P Series has more than one power supply connection point.
To reduce the risk of electric shock, disconnect all power sources before installing or
servicing the DRPC-242-ADL-P Series.
During installation, be aware of the precautions below:
▪
Read the user manual : The user manual provides a complete description of
the DRPC-242-ADL-P Series, installation instructions and configuration
options.
▪
DANGER! Disconnect Power : Power to the DRPC-242-ADL-P Series must
be disconnected during the installation process, or before any attempt is
made to access the rear panel. Electric shock and personal injury might occur
if the rear panel of the DRPC-242-ADL-P Series is opened while the power
cord is still connected to an electrical outlet.
▪
Qualified Personnel : The DRPC-242-ADL-P Series must be installed and
operated only by trained and qualified personnel. Maintenance, upgrades, or
repairs may only be carried out by qualified personnel who are familiar with
the associated dangers.
▪
Air Circulation : Make sure there is sufficient air circulation when installing the
DRPC-242-ADL-P Series. The DRPC-242-ADL-P Series
’ cooling vents must
not be obstructed by any objects. Blocking the vents can cause overheating of
the DRPC-242-ADL-P Series. Leave at least 5 cm of clearance around the
DRPC-242-ADL-P Series to prevent overheating.
▪
Grounding : The DRPC-242-ADL-P Series should be properly grounded. The
voltage feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the DRPC-242-ADL-P Series.