IEI Technology DRPC-242-ADL-P Series, User Manual

Page: 37 / 167

DRPC-242-ADL-P
Page 21
Figure 3-4: HDD Installation
3.5.2 M.2 SSD Installation
To install an M.2 B Key NVME, please follow the steps below.
Step 1:
Locate the M.2 module slot. See section 4.2.6
Step 2:
Remove the retention screw secured on the motherboard.
Step 3:
Line up the notch on the module with the notch on the slot. Slide the M.2 module
into the socket at an angle of about 20º ( Figure 3-5) .
Figure 3-5: Inserting the M.2 Module into the Slot at an Angle
Step 4:
Secure the M.2 module with the previously removed retention screw ( Figure 3-6) .