IEI Technology DRPC-242-ADL-P Series, User Manual

Page: 55 / 167

DRPC-242-ADL-P
Page 39
3.15 Maintenance
To configure the jumper settings, please follow the steps below.
Step 1:
Remove the top cover. See Figure 3-1 .
Step 2:
Locate the jumper on the embedded motherboard.
Step 3:
Make the jumper settings in accordance with the settings described and defined
in the following sections.
3.15.1 Flash Descriptor Security Override Jumper
CN Label:
ME_FLASH1
CN Type:
2-pin header, P=1.27mm
CN Location:
See
7
Figure 3-29
CN Pinouts:
See Table 3-2
The ME_FLASH1 connector is used for Flash Descriptor Security Override or ME Debug
Mode
Figure 3-29: ME Override Setting Jumper Locations