IEI Technology AFL2-15A-H61 series User Manual Download Page 139

Page: 139 / 213

AFL2-15A-H61

Page 122

Step 12:

Replace the back cover and secure it using ten (10) previously removed

retention screws.

Step 0:

7.5.2 WLAN Card Replacement

The AFL2-15A-H61 has one WLAN card slot. To replace the WLAN card, follow the

instructions below.

Step 1:

Follow all anti-static procedures. See

Section 7.2

Step 2:

Turn off the power. See

Section 7.3

Step 3:

Remove the back cover. See

Section 7.4.1

above.

Step 4:

Remove the internal aluminum back cover. See

Section

7.4.2

above.

Step 5:

Locate the WLAN card.

Step 6:

Disconnect the main and auxiliary antennas on the WLAN module (

Figure 7-5

Figure 7-5: Removing the Antennas

Step 7:

Push the two spring clips in to release the WLAN card.

Summary of Contents for AFL2-15A-H61 series






















































































































































































































Search results

Summary of Contents for AFL2-15A-H61 series

Reviews:

Related manuals for AFL2-15A-H61 series

Brands by name

Popular brands

IEI Technology AFL2-15A-H61 series, User Manual

Search results

Summary of Contents for AFL2-15A-H61 series

Reviews:

Related manuals for AFL2-15A-H61 series

Brands by name

Popular brands