IEI Technology AFL2-15A-H61 series User Manual Download Page 51

Page: 51 / 213

AFL2-15A-H61

Page 34

Step 4:

Secure the AFL2-15A-H61 to the interface pad by inserting four retention screws

through the mounting arm interface pad and into the AFL2-15A-H61.

Figure 3-18: Arm Mounting (ARM-11-RS)

3.12.3 Stand Mounting

To mount the AFL2-15A-H61 using the stand mounting kit, please follow the steps below.

Step 1:

Locate the screw holes on the rear of the AFL2-15A-H61. This is where the

bracket will be attached.

Step 2:

Align the bracket with the screw holes.

Step 3:

To secure the bracket to the AFL2-15A-H61 insert the retention screws into the

screw holes and tighten them.

Summary of Contents for AFL2-15A-H61 series






















































































































































































































Search results

Summary of Contents for AFL2-15A-H61 series

Reviews:

Related manuals for AFL2-15A-H61 series

Brands by name

Popular brands

IEI Technology AFL2-15A-H61 series, User Manual

Search results

Summary of Contents for AFL2-15A-H61 series

Reviews:

Related manuals for AFL2-15A-H61 series

Brands by name

Popular brands