IEI Technology AFL-W10A-N270, User Manual

Page: 70 / 158

AFL-W10A-N270 User Manual
Page 70

S.M.A.R.T [Auto]
Use the
S.M.A.R.T
option to auto-detect, disable or enable Self-Monitoring Analysis and
Reporting Technology (SMART) on the drive on the specified channel.
S.M.A.R.T
predicts
impending drive failures. The
S.M.A.R.T
BIOS option enables or disables this function.

Auto D
EFAULT
BIOS auto detects HDD SMART support.

Disabled
Prevents BIOS from using the HDD SMART feature.

Enabled
Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]
Use the
32Bit Data Transfer
BIOS option to enables or disable 32-bit data transfers.

Disabled
Prevents the BIOS from using 32-bit data transfers.

Enabled D
EFAULT
Allows BIOS to use 32-bit data transfers on supported
hard disk drives.
4.3.3 Super I/O Configuration
Use the
Super I/O Configuration
menu (
5
BIOS Menu 6
) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
Configure Super I/O Chipset

Serial Port1 Address [3F8/IRQ4]
Serial Port1 Mode [Normal]
Serial Port3 Address [3E8]
Serial Port3 IRQ [11]
Select RS232 or RS422/RS485 [RS232]
Serial Port4 Address
[2E8]
Serial Port4 IRQ [10]
Allows BIOS to select
Serial Port Base
Addresses

Select Screen
 
Select Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 6: Super IO Configuration